4GE+2POTS+WIFI+1USB EPON ONU
Product Brief
4GE+2POTS+WIFI+1USB EPON ONU is one of the series Gigabit Passive Optical Network user terminals from Shenzhen Natywish Technologies.,Ltd. Compliance with IEEE802.3ah standard and China Telecom EPON equipment technical requirements, it’s good at inter-operation with most of all EPON OLT in industry by support full OMCI. With cost effective, easy deployment, stable software and strong function advantages, it’s specially suitable for FTTH (Fiber to the Home), and meet the requirements of wideband access network.
Product Feature
l Support 4094 VLANs
l Support 2K MAC address table, support MAC address limitation
l Support port speed limitation, storm control, isolation and loop detection
l Support Dying Gasp
l Support IGMP Snooping, support CTC controllable multicast
l Support 4 priority queues scheduling with SP algorithms
l WAN connection support route mode and bridge mode
l WAN connection support PPPoE, dynamic IP and static IP configuration at route mode
l Support OMCI, CLI and WEB configuration management
Hardware Specification |
Upstream | 1 EPON interface, SC single-mode/single-fiber |
Wavelength | Tx 1310nm, Rx 1490nm |
Optical interface | SC/PC connector |
Downstream | 4x 10/100/1000Mbps auto adaptive Ethernet interfaces, Full Duplex/Half Duplex, RJ45 connectors 2 VOIP interface, support 4REN per pots, RJ11 connectors 1 WiFi interface, support 802.11b/g/n, 2T2R 1 USB2.0 interface, support 500mA device |
Leds indicators | 12 indicators, for status of power, PON port, FXS,WLAN,USB and Ethernet ports. |
DC power supply | +12V, external AC-DC power adaptor |
Power switch | 1 Power On/Off |
Power consumption | ≤18W |
Operating condition | Operating temp: -5 - +55℃, operating humidity:10-90%(non-condensed) |
Storing condition | Storing temp: -30 - +60℃, storing humidity:10-90%(non-condensed) |
Dimension | 176mm（Length）* 145mm（Width）* 37mm（Height） |
Net weight | <0.8kg |
Software Function |
PON port | Compliance with IEEE802.3ah standard and China Telecom EPON equipment technical requirements |
Support 4 priority queues scheduling with SP algorithms |
Support Dying gasp |
Ethernet ports | Support MDI/MDIX |
Support ingress/egress rate limitation |
Support isolation |
WLAN | Support AP mode |
Support 802.11b/g/n |
Support multiple SSIDs |
Support WPA/WPA2, WPA-PSK/WPA2-PSK |
Support ch.1-11 and auto channel |
WAN | Support 4094 Vlan |
| Support Bridge/Router Mode |
Support DHCP/PPPOE/Static IP |
Support Service including Internet,VOIP,IPTV and TR069 |
MAC Learning | Support 2K MAC address |
Support MAC limitation |
Support static MAC address |
Configurable aging time |
STP | Support IEEE 802.1d (STP) |
Multicast | Support IGMP Snooping |
Support 255 multicast entry |
Support IGMP v1/v2 |
Support CTC controllable Snooping |
QoS | Support 802.1p priority queue scheduling |
Support SP scheduling algorithms |
ACL | Rule according to destination IP, source IP, destination MAC, source MAC, destination protocol port number, source protocol port number, SVLAN, Ethernet type, IP priority, IP packet protocol type etc |
Packet filtering according to above rules |
Flow Control | Support IEEE 802.3x duplex flow control |
Support port rate limitation |
Mirroring | Support port mirroring for LAN interfaces, PON ports and CPU |
Maintenance | Support configuration saving, and restore to factory configuration |
Support local upgrading through telnet and web |
Support remote upgrading from OLT |
USB | Support USB1.0 USB2.0 |
Support USB Host |
Support Auto Mount |
VOIP | Support SIP |
Support DTMF |
Support Echo canceller |
Support G.711 a/u law, G.729, G.722 |
Support VAD,CNG |
Support T.30, T.38 |
Management | Support local or remote CLI configuration |
l Support remote upgrade with OLT and local upgrade in WEB
Product Specification
| Support web configuration |
Support OMCI |